Informatie (ENG)


- DC 12V power supply (voltage range 9-13V )
- Standby current (all relays closed) 11-13MA, 1 relay open 44MA, 2 relays open 77MA, 3 relays open 110MA,4 relays open 140MA
- "open" "close" "Momentary" "Self-locking" "Interlock" "Delay" 6 Commands
- Two instruction-control mode : AT command and MODBUS command
- Under the AT command ,the maximum delay is 9999 seconds
- Under the MODBUS command ,the maximum delay is 255 seconds
- AT commands can be made serial HyperTerminal (serial assistant) Enter;
- MODBUS commands can be made serial HyperTerminal (serial assistant) OR "Modbus Poll" Enter;
- Under the MODBUS command mode, it can support up to 32 devices in parallel
- Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC

Jumper J5:
- AT command mode (A5 = OFF), in this mode can be through the serial HyperTerminal (serial assistant) enter a simple AT command control relay. AT command mode time up to 9999 seconds
- MODBUS command mode (A5 = ON), you can control a variety of ways: Serial Hyper Terminal Control (need to manually add the CRC), Modbus Poll software control (software automatically add the CRC), PLC or MCU process control

Geef beoordeling

Om een beoordeling te schrijven moet u inloggen of zich registreren

Relais module 12V, 4x250V/10A NO/NC Modbus RS485

  • Model: REL-MOD-4CH-12V-MODBUS-RS485
  • Beschikbaarheid: Op voorraad
  • € 14,34

  • Excl. BTW: € 11,85

Tags: Relais, module, 12V, 4x250V/10A, NO/NC, Modbus, RS485